AS Bearings and Drives can supply you with belts and associated pulleys from all the leading belt manufacturers including:

MEGADYNE, OPTIBELT, FENNER, GOODYEAR, ROULANDS, GATES, SYNCROFLEX, BRECOFLEX and many more.....

For full information on belts and pulleys available, please download the Megadyne Product Catalogue below.

Megadyne Product Catalogue (4484kb)

V and Wedge belts are readily available in the following sizes. For full specification, please download the Megadyne Belt catalogue by clicking on the link above.

• Z section 10mm x 6mm or the M section fractional horsepower series
• A section 13mm x 8mm
• B section 17mm x 11mm
• C section 22mm x 14mm
• D section 32mm x 20mm
• SPZ section 10mm x 8mm
• SPA section 13mm x 10mm
• SPB section 16mm x 13mm
• SPC section 22mm x 18mm
• 8V Delta section 25mm x 23mm

Also available are Cogged Raw Edge versions which may be required for certain drive design perameters.

For certain applications, such as severe vibration often found on some Quarrying equipment, Banded Belts are also available.

Classic Timing Drives (Both Single and Double sided Belts)

• MXL 2.032mm Pitch pulleys and belts
• XL 5.08mm Pitch pulleys and belts
• L 9.525mm Pitch pulleys and belts
• H 12.7mm Pitch pulleys and belts
• XH 22.225mm Pitch pulleys and belts
• T2.5 2.5mm Pitch pulleys and Belts
• T5 / AT5 5mm Pitch pulleys and Belts
• T10 / AT10 10mm Pitch pulleys and Belts

 

 

RPP Drives both Single and Double sided Belts, Gates Polychain

• RPP3 3mm Pitch pulleys and Belts
• RPP5 5mm Pitch pulleys and Belts
• RPP8 8mm Pitch pulleys and Belts
• RPP14 14mm Pitch pulleys and Belts
• Gates Polychain 8mm Pitch pulleys and Belts
• Gates Polychain 14mm Pitch pulleys and Belts

A Belt cutting service is available for fast availability of various belt widths.

Various belts are available for special applications such as conveying of small items or fragile materials.

Certain belts can be covered with various types or backings which are bonded to the original outer surface. This process is carried out by the manufacturers.